Do not install the control lines and/or pulse input lines together with the main
circuit or power lines, and also do not bring them close to each other.
Keep a distance of 150 mm (5.91 inch) or more between them. Failure to do
so may cause a malfunction due to noise.
Use the programmable controller in the environment conditions given in the
general specifications of the User's Manual for the CPU module.
Failure to do so may cause an electric shock, fire, malfunction, or damage to
or deterioration of the product.
While pressing the installation lever located at the bottom of the module,
insert the module fixing projection into the fixing hole in the base unit, and
mount the module with using the hole as a supporting point.
Incorrect module mounting may cause a malfunction, failure, or drop of the
module.
In an environment of frequent vibrations, secure the module with screws.
The screws must be tightened within the specified torque range.
If the screw is too loose, it may cause a drop, short circuit, or malfunction.
Excessive tightening may damage the screw and/or the module, resulting in
MKS2PI AC6
E6B2-CWZ3E 360P/R 2M
MK3P-S AC120
E52-CA35A D=1.6 NETU 1M
R88M-K1K020T-B-Z
FX3UC-96MT/DSS
A22-SR-02M
A22L-GG-12-01M
R88M-W5K515T-BS2
A22L-GG-24-01M
MK2PN-S AC24
E5AZ-Q3HMT AC100-240
R88M-K1K030H-O-Z
A165W-T2MG-24D-2
R88M-G05030T-OS2-Z
A165L-TAM-5-2
E3ML-S2E4-G 4M
CQM1-PD026
MK2P2-S AC110
MM2XP DC48
E3JK-D61 2M
E6C2-CWZ1X 1200P/R 2M
A165L-ARM-24-1
E2E-X2F1 2M
CJ1M-CPU21
E2E2-X7D15 2M
A16L-JAM-24-2
E32-D12F 2M
E6F-AB3C 360 2M
TL-N20ME1-1 5M
R88M-W20030T
E6A2-CS5C 100P/R 2M
E5AN-C3ML-500 AC100-240
A22W-2MR
A22R-FA-M
A22W-2MA-12A-10
E3ML-ZHM8
E2E-X1R5E1-M3
E6B2-CWZ3E-10 100P/R 5M
E3F3-R32M 2M
A22L-TW-5-11M
R88M-GP20030H-S2-Z
CQM1-CPU45-V1
MM4 AC100/(110)
E6H-CWZ6C 1000P/R 0.5M
TL-T5MY25 2M
E32-T14LR 2M
E3Z-L81 5M
E5AN-HPRR2BM-500 AC100-240
MKS2PIN1 DC12