ndle this product properly. Also pay careful attention to safely and handle
the module properly.
These precautions apply only to Mitsubishi equipment. Refer to the user’s
manual of the CPU module to use for a description of the PLC system safety
precautions.
These ● SAFETY PRECAUTIONS ● classify the safety precautions into two
categories: "DANGER" and "CAUTION".
Depending on circumstances, procedures indicated by
may also be linked to serious results.
In any case, it is important to follow the directions for usage.
Store this manual in a safe place so that you can take it out and read it
whenever necessary. Always forward it to the end user.
[DESIGN PRECAUTIONS]
[INSTALLATION PRECAUTIONS]
Procedures which may lead to a dangerous condition
and cause death or serious injury if not carried out
properly.
Procedures which may lead to a dangerous condition
and cause superficial to medium injury, or physical
damage only, if not carried out properly.
DANGER
CAUTION
CAUTION
• Configure an interlock circuit in a sequence program so that the system
operates on the safety side using the communication status information
in the event the data link falls into a communication problem.
Otherwise, erroneous output and malfunction may result in accidents.
• Remote input and output can not be switched ON or OFF when a
problem occurs in the remote I/O modules. Therefore build an external
monitoring circuit that will monitor any input signals that could cause a
serious accident.
• Do not have control cables and communication cables bundled with or
placed near by the main circuit and/or power cables. Wire those cables
at least 100mm(3.94 inch) away from the main circuit and/or power
cables. It may cause malfunction due to noise interference.
• Use the module and the flat cable dedicated to CC-Link/LT without
applying any force on them.
Otherwise, such cables may be broken or fail.
DANGER
CAUTION
• Use the module in an environment that meets the general specifications
contained in this manual. Using this module in an environment outside
the range of the general specifications could result in electric shock, fire,
erroneous operation, and damage to or deterioration of the product.
• Do not directly touch the module's conductive parts.Doing so could
cause malfunction or trouble in the module.
• Tighten the module securely using DIN rail or installation screws within
the specified torque range.
If the screws are too lose, the module may drop from its installation
position, short circuit, or malfunction. If the screws are too tight, the
screws may be damaged, which may cause the module to drop from its
installation position or short circuit.
• Install the module on a flat surface.
If the mounting surface has concave and/or convex, an excessive f
A165L-ARM-5D-1
R88M-K4K030C-B-Z
MK3PN-I AC110
A16-JGM
R88M-G4K510H-S2-Z
A22-CR-02M
E2V-X2C1 2M
MK3PN-I DC48
MKS1TIN-10 AC110
E2E-X5F2 5M
E32-ZD11 2M
E6B2-CWZ6C 50P/R 2M
E52-CA1D609 1.5M
R88M-K4K510C-Z
R88M-G1K030H-BS2-Z
A22RW-2MY-6A-10
E3S-LS3NW 2M
E2EM-X8B2-M1
E2EV-X5C2 5M
CQM1-B7A02
E3S-R31 2M
E6C3-CWZ5GH 1800P/R 2M
A22RW-3MR-12A-20
E3X-DAG41-S 2M
EE-SPX406-W2A 1M
C200H-RM201
A16L-TWM-24-2
CPM2C-CIF11 -CH
E3S-BD81 2M
MM2KB DC24
E3S-BT81 5M
R88M-K2K010T-BOS2-Z
MR-JCCBL2M-L
E52-CA20A D=3.2 NETU 2M
CPM2B-32C2DT-D
E4B-T1F4 5M
MKS3P-2 AC24
V600-HA51 2M
E2FM-X5C1 2M
R88M-G4K030H-O-Z
NSJ5-TQ11B-M3D
R88M-K2K030F-BO-Z
E2E-X1R5F1-Z 5M
E3JK-5DM2-N 2M
E32-DC200-49 2M
TL-YS15MY24 AC100-240
E6C2-CWZ5B 50P/R 2M
MY4NJ-CR AC200/220
A22L-GR-T1-20M
A22-TA-01M