MITSUBISHI Active Data Interface Module FX3U-232ADP
Model: FX3U-232ADP.
Interface: RS232C with 9 pin D-SUB compact plug (photocoupler isolation).

Power supply: 5 V DC / 30 mA (from base unit).

Communication speed: 0.3 – 115.2 kbps.

MELSEC FX3U series compatible.

Weight(kg): 0.08.

Dimensions (W x H x D)mm: 17.6 x 90 (106) x 81.5
________________________________________________________________________________________

Active Data Interface Modules FX2NC-232ADP, FX3U-232ADP

The additional active data interface modules permit active communication between the
PLC and surrounding RS232C peripherals. All device information can be sent or received via
these interfaces.

The module is suitable for the connection of printers, bar code readers, PCs and other PLC
systems.The communication is handled by the PLC program using the RS instruction.

The connection is to the communications bus on the left side of the controller.

The internal serial RS422 interface is also fully available.

Note: The FX2NC-232ADP requires a FX2N-CNV-BD or FX1N-CNV-BD interface adapter when connecting to
a FX1S, FX1N/ or FX2N base unit. The FX3U-232ADP can only be used with the FX3U and requires a function
extension board.

MITSUBISHI Adapter Board FX3U-USB-BD
MITSUBISHI Memory cassette FX3U-FLROM-64L
MITSUBISHI Memory cassette FX3U-FLROM-64
MITSUBISHI Memory cassette FX3U-FLROM-16
MITSUBISHI Communications Adapter FX3U-CNV-BD
MITSUBISHI PLC FX3U-80MT/ESS
MITSUBISHI PLC FX3U-80MT/ES
MITSUBISHI PLC FX3U-80MT/DSS
MITSUBISHI PLC FX3U-80MT/DS
MITSUBISHI PLC FX3U-80MR/ES
MITSUBISHI PLC FX3U-80MR/DS
MITSUBISHI Control and Display Panel FX3U-7DM-HLD
MITSUBISHI Control and Display Panel FX3U-7DM
MITSUBISHI PLC FX3U-64MT/ESS
MITSUBISHI PLC FX3U-64MT/ES
MITSUBISHI PLC FX3U-64MT/DSS
MITSUBISHI PLC FX3U-64MT/DS
MITSUBISHI PLC FX3U-64MR/ES
MITSUBISHI PLC FX3U-64MR/DS
MITSUBISHI FX Series interface block FX3U-64CCL