OMRON ASCII Module C200H-ASC21
ASCII Unit
This program runs independently from the ladder-diagram program in the PLC.

Name:ASCII Module.
Model:C200H-ASC21.
Communications port>Port 1:RS-232C(peripheral device or termi-nal connection).
Communications port>Port 2:RS-422A/485(peripheral device connec-tion).

OMRON TTL Input Module C200H-ID501
Model:C200H-ID501.
No. of inputs:32 pts.
Specifications:5 VDC.

OMRON ID Sensor Module C200H-IDS01-V1
ID Sensor Units
The ID Sensor Unit is a non-contact ID system that unifies product,production, and control data, and provides for efficient production of different products in varying quantities. A separate catalog is available providing information about ID systems in factory automation.

Name:ID Sensor Module.
Model:C200H-IDS01-V1.
Communications control procedure:Interactive.
Number of R/W Heads(antennas) connected:One per ID Sensor Unit.

OMRON Relay Output Module C200H-OC224N
Model:C200H-OC224N.
No. of points:8 pts.
Specifications:2A,250VAC/24VDC(For resistive loads)Independent commons.

OMRON Transistor Output Module C200H-OD216
Model:C200H-OD216.
No. of points:8 pts.
Specifications:0.8 A, 24 VDC; source type (PNP); with load short protection.

OMRON Analog Input Module C200H-AD001
Model:C200H-AD001.
Input points:4.
Voltage input:1 to 5V or 0 to 10 V.
Current input:4 to 20 mA.

OMRON Analog Input Module C200H-AD002
Model:C200H-AD002.
Input points:8.
Voltage input:1 to 5 V, 0 to 10 V, or –10 to 10 V.
Current input:4 to 20 mA.

OMRON Power Supply Module C200H-APS03
C200H Power Supply Aux PS for SLK11 C200H-APS03.
Required when supplying backup power.

OMRON ASCII Module C200H-ASC02
ASCII Unit
This program runs independently from the ladder-diagram program in the PLC.

Name:ASCII Module.
Model:C200H-ASC02.
ASCII/BASIC Module Utility Software:For AT-compatible computers; enables program development, downloading,uploading, etc.

OMRON ASCII Module C200H-ASC11
ASCII Unit
This program runs independently from the ladder-diagram program in the PLC.

Name:ASCII Module.
Model:C200H-ASC11.
Communications port>Port 1:RS-232C(peripheral device or termi-nal connection).
Communications port>Port 2:RS-232C(peripheral device connec-tion).

OMRON ASCII Module C200H-ASC31
ASCII Unit
This program runs independently from the ladder-diagram program in the PLC.

Name:ASCII Module.
Model:C200H-ASC31.
Communications port>Port 1:RS-232C(peripheral device connec-tion).
Communications port>Port 2:RS-232C(peripheral device connec-tion).
Communications port>erminal port:RS-232C(terminal connection).

OMRON Mounting Bracket C200H-ATT01
Used to attach Hand-held Programming Console to a panel.