• Always ground the FG terminal for the programmable controller. There is a risk of electric shock
or malfunction.
• When turning on the power and operating the module after wiring is completed, always attach
the terminal cover that comes with the product.
There is a risk of electric shock if the terminal cover is not attached.
• Tighten the terminal screws within the range of specified torque.
If the terminal screws are loose, it may result in short circuits or malfunction.
If the terminal screws are tightened too much, it may cause damage to the screw and/or the
module, resulting in short circuits or malfunction.
• Be careful not to let foreign matter such as sawdust or wire chips get inside the module.
They may cause fires, failure or malfunction.
• The top surface of the module is covered with protective film to prevent foreign objects such as
cable offcuts from entering the module when wiring.
FX2N-64CL-M
MR-J3BUS05M
MR-RB3G-4
GT16M-MMR
MR-J3ENSCBL5M-H
A3NMCA-56
MR-J3BUS30M-B
Q2MEM-ADP
Q3MEM-8MBS-SET
MR-J2S-55KA4
MR-DCL37K-4
MR-PWS1CBL5M-A1-H
MR-E20A
A60MX
MR-JCCBL5M-L
Q170CDCBL5M
FX2N-64MT-D
FX3G-24MT/DSS
MR-J2S-30KA4
GT05-MEM-256MC
Q1MEM-512S
FX1N-5DM
MR-JCCBL20M-H
MR-ESCBL2M-H
FX1N-EEPROM-8L
MR-J2S-37KB4
MR-BKS1CBL2M-A1-L
MR-BKS1CBL2M-A1-H
Q170ENCCBL5M
FX3U-32MR/DS
MR-RB032
A60MXT
FX1N-60MR-D
FX3UC-16MT/DSS
Q2MEM-1MBS
MR-J2S-60A
MR-J2S-45KB4
GT1665M-VTBD
MR-J2HBUS5M
FX3G-14MR/DS
FX2N-32MR-UA1/UL
FX3G-60MT/ESS
MR-J2S-22KA4
FX2N-80MT-D
GT05-MEM-2GC
MR-J3ENCBL5M-A1-L
MR-JCCBL30M-L
MR-J3ACHECK
A2SMCA-60KE
MR-JCCBL10M-H