OMRON | Mitsubishi
Home >> Industry News >> News >> Text
Latest News
This month TOP10
Accutube - Single Gear Drive Accutube
http://www.saleplc.com
Articles Entry: Source:Network Published Time:2014-6-6
Accutube - Single Gear Drive Accutube

REVIEW

>> For more information, click here

 

For over 50 years Meriam has been successfully involved in the Averaging Pitot Tube business, mainly through the designing and manufacturing of ACCUTUBEs. This success has been established through thousands of effective installations worldwide. While other companies changed their tube to Bullet, Diamond or Flat-Face, with assertions that each is better than the other, Meriam has always used the round probe design providing our customers with low-cost, accurate flow measurement.
  
The Meriam Accutube brand is field proven to be the most robust and accurate design, from your simplest application to your most difficult. Meriam Quality Assurance programs assures many years of service from the Accutube Flow Meter.
 
Why Select an Accutube
 
There are several features specific to our Accutubes that put them at the top of their class. These specifications have been tested and certified by independent labs.
  • Flow rate turndown is typically 10:1 and can be increased with a high accuracy DP transmitter
  • Accuracy is better than + 1%
  • 0.1% Repeatability regardless of upstream/downstream straight run
  • Bi-directional flow measurement using a single transmitter
  • Can measure Volumetric or Mass Flow Rates
  • True double averaging design
  • Can be installed with any brand of DP or Multivariable transmitter
Meriam Quality Assurance:
  • ISO 9001:2008
  • Material Certifications, PMI Testing Available
  • Calibrated by Utah Research Laboratory - Utah State University, University of Michigan and NIST Traceable Flow Elements at Meriam
  • Hydrostatic, Dye Penetrant and Radiographic Testing available
Other Performance Benefits:
  • Very low permanent pressure loss minimizes the effect on process
  • Inexpensive to buy, install and maintain
  • No moving parts insures long-term accuracy and stability
  • Factory sizing insures best Accutube selection for your application
Options Include:
  • Gear drive or jack screw for retracting flow sensors
  • Three-valve manifold for direct transmitter mounting
  • Integral RTD mounting
  • High pressure, high temperature designs
  •  Exotic materials for corrosive or high temp. processes such as Monel, Inconel and hastelloy are available 

>> For more information, click here

 

Related News More about  Accutube  Articles
NO Data