OMRON | Mitsubishi
Home >> Products >> OMRON >> Temperature & Process Controls >> Single-Loop Temperature Controllers >> E5CN - Communications Units
OMRON E5CN - Communications Units
  1/32 DIN to 1/4 DIN On-Panel Temperature Controllers

E5CN - Communications Units

E5CN Temperature Controller Series - Communications Units


Various Communication Option Boards

    Specifications 
    • Thermocouple input: Types K, J, T, L, E, U, N, R, S, B, W, or PL II
    • Platinum RTD input: Pt100 and JPt100
    • Omron infrared temperature sensor input: 10 to 70 degrees C, 60 to 120 degrees C, 115 to 165 degrees C, 160 to 260 degrees C
    • Voltage input: 0 to 50 mV
    • Analog current input: 4-20 mA, 0 to 20 mA
    • Analog voltage input: 1 to 5 V, 0 to 5 V, 0 to 10 V
    • Relay output: SPST-NO, 3 A at 250 VAC (SPDT - plug-in models)
    • 100,000 electrical operations (standard)
    • 1 million operations (long-life hybrid relay)
    • Voltage output: 12 VDC +/- 15% for SSR, 21 mA maximum load with short-circuit protection
    • Voltage pulse output is for driving an external SSR
    • Current output: 4-20 mA DC/0-20 mA DC, load: 600 ohm maximum, approximately 10,000 resolution
    OMRON Option Unit E53-CN01N2
    Model: E53-CN01N2.
    Communications RS-232C
    OMRON Option Unit E53-CN03N2
    Model: E53-CN03N2.
    Communications RS-485
    OMRON Option Unit E53-CNBFN2
    Model: E53-CNBFN2.
    Event inputs.
    Transfer Output
    OMRON Option Unit E53-CNH01N2
    Model: E53-CNH01N2.
    Communications RS-232C.
    Heater burnout/SSR failure/ Heater overcurrent detection
    OMRON Option Unit E53-CNH03N2
    Model: E53-CNH03N2.
    Communications RS-485.
    Heater burnout/SSR failure/Heater overcurrent detection
    OMRON Option Unit E53-CNHBN2
    Model: E53-CNHBN2.
    Heater burnout/SSR failure/Heater overcurrent detection.
    Event inputs
    OMRON Option Unit E53-CNHH03N2
    Model: E53-CNHH03N2.
    Communications RS-485.
    3-phase heater burnout/SSR failure/ Heater overcurrent detection
    OMRON Option Unit E53-CNP03N2
    Model: E53-CNP03N2.
    Communications RS-485.
    External power supply for ES1B
    OMRON Option Unit E53-CNPBN2
    Model: E53-CNPBN2.
    Event inputs.
    External power supply for ES1B
    OMRON Option Unit E53-CNPHN2
    Model: E53-CNPHN2.
    Heater burnout/SSR failure/Heater overcurrent detection.
    External power supply for ES1B
    OMRON Option Unit E53-CNQ01N2
    Model: E53-CNQ01N2.
    Communications RS-232C.
    Control output 2 (Voltage for driving SSR)
    17 Results Page 1 of 2    1 2 Next >>