OMRON | Mitsubishi
Home >> Products >> MITSUBISHI >> FX Series PLC >> Positioning Modules
MITSUBISHI Positioning Module FX2N-10GM
Model: FX2N-10GM.
Number of controllable axes: 1 axis.
Program memory: 3.8 K steps with EEPROM.
Power consumption: 5 W.
MELSEC FX2N.
FX2NC.
FX3U series compatible.
Weight(kg): 0.3.
Dimensions (W x H x D)mm: 60 x 90 x 87
MITSUBISHI Positioning Module FX2N-10PG
Model: FX2N-10PG.
Signal level for digital inputs: 5 V DC / 100 mA; 24 V DC / 70 mA.
Power supply: 5 V DC / 120 mA (from base unit).
Accessible axes: 1.
Output frequency(pulse/s): 1 – 1000000.
MELSEC FX2N.
FX2NC.
FX3U series compatible.
Weight(kg): 0.2.
Dimensions (W x H x D)mm: 43 x 90 x 87
MITSUBISHI Positioning Module FX2N-1PG-E
Model: FX2N-1PG-E.
Signal level for digital inputs: 24 V DC / 40 mA.
Power supply: 5 V DC / 55 mA (from base unit).
Accessible axes: 1.
Output frequency(pulse/s): 10 – 100000.
MELSEC FX2N.
FX2NC.
FX3U series compatible.
Weight(kg): 0.3.
Dimensions (W x H x D)mm: 43 x 90 x 87
MITSUBISHI Positioning Module FX2N-1RM-E-SET
Model: FX2N-1RM-E-SET.
Number of controllable axes: 1 using resolver F2-720RSV.

Number of CAM output I/Os: 48 outputs (32may be ON at one time).

Control resolution: 1 revolution of 720 divisions (0.5 degrees) or 360 divisions (1 degree).
MELSEC FX3U series compatible.
Weight(kg): 0.5.

Dimensions (W x H x D)mm: 55 x 111 x 97
MITSUBISHI Positioning Module FX2N-20GM
Model: FX2N-20GM.
Number of controllable axes: 2 axes (independently or simultaneously).
Program memory: 7.8 K steps with built-in RAM (battery backup): EEPROM optionally.
Power consumption: 10 W.
MELSEC FX2N.
FX2NC.
FX3U series compatible.
Weight(kg): 0.4.
Dimensions (W x H x D)mm: 86 x 90 x 87
MITSUBISHI Positioning Module FX3U-20SSC-H
Model: FX3U-20SSC-H.
Number of controllable axes: 2 axes.

No. of occupied I/O points: 8.

Servo bus: SSCNET III.

MELSEC FX3U series compatible.

Weight(kg): 0.3.

Dimensions (W x H x D)mm: 55 x 90 x 87
6 Results Page 1 of 1